从废水到新能源:光催化燃料电池的优化与应用

随着经济的飞速发展,社会对能源的需求日益扩大,对工业废水的无害化处理也提出了更高的要求。光催化燃料电池 (photocatalytic fuel cell, PFC) 在燃料电池中引入半导体光催化材料作为电极,实现了有机污染物高效降解和同步对外产电的双重功能,在废水无害化与资源化利用方面具有潜在的应用价值。半导体光催化电极是PFC系统高效运行的核心组件,增强其可见光响应和光生载流子分离是提高PFC性能的关键策略。反应器结构设计和运行参数优化也有利于改善PFC性能。本文从PFC基本原理和应用入手,综述了PFC在环境污染物资源化处理中的研究进展,并详细阐述了提高PFC的污染控制性能和产电效率的优化手段,为进一步设计高效稳定的PFC系统并实现其在水污染控制和清洁能源生产中的应用提供理论指导。     

Kinetics and Mechanism of the Reaction of Triphenylphosphine with Methyl Vinyl Ketone

Russian Journal of General Chemistry - Kinetics of the reaction of triphenylphosphine with methyl vinyl ketone has been studied using the stopped flow technique. The experimental data have...     

Spectroscopy of Zinc Oxide Thin Films near the Fundamental Absorption Edge

Optics and Spectroscopy - The optical absorption spectra of zinc oxide (ZnO) thin films formed by reactive cathode sputtering are studied. The observed absorption of light in the region of photon...     

衬底对单层二硫化钼光学性质的影响

为了实现二硫化钼器件化应用,通过机械剥离和PMMA纳米转移相结合的方法,研究二氧化硅、氮化硅和蓝宝石衬底对单层二硫化钼拉曼光谱以及光致发光光谱的影响.实验结果表明,单层二硫化钼在二氧化硅、氮化硅及蓝宝石衬底间转移会释放应力.氮化硅和蓝宝石衬底对单层二硫化钼引入p型掺杂,导致转移后拉曼光谱中的403 cm-1处A1g峰发生0.48 cm-1和1.20 cm-1的蓝移,光致发光光谱中的位于662 nm处的I峰有5.44 nm和12.73 nm的红移.本工作对单层二硫化钼的应用具有重要意义.     

Theoretical and experimental studies on optically tunable hydrogen bonded liquid crystal complex derived from mesogenic and non-mesogenic aromatic compound

A novel hydrogen bonded liquid crystal (HBLC) complex is synthesized from non-mesogenic benzylmalonic acid (BMA) and mesogenic 4-nonyloxybenzoic acid (9OBA). Structural properties and optimized vibrational frequencies of BMA + 9OBA have been studied by FT-IR spectrum. The weak intermolecular interaction between the molecules is proved by NBO and Mulliken charge distribution analysis. The optical and thermal properties are investigated by POM, DSC, UV-Visible and PL techniques. The present HBLC complex exhibits schlieren textures of nematic, broken focal conic texture of smectic C and multicolored mosaic texture of smectic G phases respectively which is not observed in the pure mesogen (9OBA). The HBLC complex geometry is optimized by DFT method at the level of B3LYP basis set 6311G (d, p). The electronic properties of HBLC complex such as, NBO, HOMO-LUMO, ESP and Mulliken charge distribution are also studied. A noteworthy observation is brought out by identifying the presence of photoluminescence in nematic phase due to the variation in intermolecular interaction of the mesophase. The utility of the same complex is discussed. The phase width, thermal stability factor, tilt angle, phase transition temperature and its enthalpy values are reported.     

A Biosilification Fusion Protein for a ‘Self‐immobilising’ Sarcosine Oxidase Amperometric Enzyme Biosensor

Monomeric sarcosine oxidase (mSOx) fusion with the silaffin peptide, R5, designed previously for easy protein production in low resource areas, was used in a biosilification process to form an enzyme layer electrode biosensor. mSOx is a low activity enzyme (10–20 U/mg) requiring high amounts of enzyme to obtain an amperometric biosensor signal, in the clinically useful range <1 mM sarcosine, especially since the K_m is >10 mM. An amperometric biosensor model was fitted to experimental data to investigate dynamic range. mSOx constructs were designed with 6H (6×histidine) and R5 (silaffin) peptide tags and compared with native mSOx. Glutaraldehyde (GA) cross‐linked proteins retained ～5 % activity for mSOx and mSOx‐6H and only 0.5 % for mSOx‐R5. In contrast R5 catalysed biosilification on (3‐mercaptopropyl) trimethoxysilane (MPTMS) and tetramethyl orthosilicate (TMOS) particles created a ‘self‐immobilisation’ matrix retaining 40 % and 76 % activity respectively. The TMOS matrix produced a thick layer (>500 μm) on a glassy carbon electrode with a mediated current due to sarcosine in the clinical range for sarcosinemia (0–1 mM). The mSOx‐R5 fusion protein was also used to catalyse biosilification in the presence of creatinase and creatininase, entrapping all three enzymes. A mediated GC enzyme linked current was obtained with dynamic range available for creatinine determination of 0.1–2 mM for an enzyme layer ～800 nm.     

The spin-isospin decomposition of the nuclear symmetry energy from low to high density

The energy per particle BA in nuclear matter is calculated up to high baryon density in the whole isospin asymmetry range from symmetric matter to pure neutron matter.The results,obtained in the framework of the Brueckner-Hartree-Fock approximation with two-and three-body forces,confirm the well-known parabolic dependence on the asymmetry parameterβ=(N?Z)/A(β^2 law)that is valid in a wide density range.To investigate the extent to which this behavior can be traced back to the properties of the underlying interaction,aside from the mean field approximation,the spin-isospin decomposition of BA is performed.Theoretical indications suggest that theβ^2 law could be violated at higher densities as a consequence of the three-body forces.This raises the problem that the symmetry energy,calculated according to theβ^2 law as a difference between BA in pure neutron matter and symmetric nuclear matter,cannot be applied to neutron stars.One should return to the proper definition of the nuclear symmetry energy as a response of the nuclear system to small isospin imbalance from the Z=N nuclei and pure neutron matter.     

基质刚性影响声孔效应介导的单细胞基因转染

实验研究了基质刚性对单细胞质粒DNA转染效果的影响。实验采用高声压短脉冲(0.45MPa,10μs)条件的超声对培养在不同硬度凝胶基质(软的凝胶基质：0.2kPa,硬的凝胶基质：40kPa)上的力学敏感细胞NIH 3T3进行质粒DNA转染实验。实验结果表明,培养在硬的凝胶基质上的细胞,质粒DNA转染效率明显高于培养在软的凝胶基质上的细胞。进一步对质粒DNA进行荧光示踪可知培养在不同刚性基质上的细胞导入质粒DNA的方式不同。当细胞被培养在硬的凝胶基质上时,通过声致穿孔产生的小孔进入细胞内的质粒DNA更多,而培养在软的凝胶基质上的细胞,更多的质粒DNA可以通过非声致穿孔作用,例如内吞方式导入细胞。 细胞骨架蛋白分布规律表明,硬的凝胶基质上培养的细胞内有更多的F肌动蛋白微丝,可以更好地支撑起细胞的铺展形态,相对不容易发生内吞作用。而软的凝胶基质上培养的细胞内F肌动蛋白则更多以球形状态存在,细胞形貌骗向圆形,此时更容易发生胞吞作用。     

Optimized spacer layer thickness for plasmonic-induced enhancement of photocurrent in a-Si:H

Journal of Nanoparticle Research - Plasmonic interfaces consisting of silver nanoparticles of different sizes (50–100&;nbsp;nm) have been processed by the self-assembled dewetting...     

Formation and pharmacological activity of silicon—chitosan-containing glycerohydrogels obtained by biomimetic mineralization

The biomimetic sol—gel synthesis of silicon—chitosan-containing glycerohydrogels was carried out using silicon tetraglycerolate as a precursor. It was found that chitosan accelerates gel formation in weakly acidic media. In more acidic media, the kinetics of the process changes according to the curve with a maximum, which can be attributed to different mechanisms of silanol condensation before and after the isoelectric point. The investigated silicon—chitosan-containing glycerohydrogels exhibit antibacterial, anti-inflammatory, and wound healing activity. The synthesized hybrid glycerohydrogels are promising materials for biomedical applications.